2010 © SIMAT S.r.l. - Industrial area via Enore Tosi, 1 - 33034 Fagagna (UD) - Italy
firstname.lastname@example.org - phone +39 0432 958839 | +39 328 3476586 - VAT IT02550140301 - All rights reserved
Tube bending machine OrbiBend, innovative solution for tube processing without mandrel. OrbiBend bends tubes with diameters up to 16 mm (mod 116) or up to 22 mm (mod 122) without mandrel. With its innovative mobile orbital cutting group it’s possible cut-off the tube at the end of the curve, perform…
PIPE BENDING MACHINE LEVITATE 135
The bending machine covered by an international patent that combines high performances with a saving of more than $ 110.000 per year! With Levitate 135 you bends, shapes and cuts starting from coil, tubes with mandrel having diameters from 16 to 35 mm and…
Levitate 16 bends directly from the coil and work tubes with diameters from 4 to 42 mm without mandrel or from 9.52 to 16 mm with mandrel and reaches with a medium radius even lower than 1,5 times the diameter.
The bending machine PLS 16 works directly from the coil without mandrel tubes with diameters from 4 to 22 mm without mandrel.
With the PLC control system you can easily setup the bending radius, bending angle, and simulate with a 3D imagine the production.
You can integrate an ending form…
Levitate S bends directly from the coil and work tubes with diameters from 4 to 35 mm with and/ or without mandrel.
Mach 6 is a CNC end forming machine easy to equip, versatile and fast that permits to execute working processes as like flattening, enlarging, chips and burrs removal etc..
The end forming machine Mach 9 is designed to reduce at most the overall dimensions and to allow an easy location inside the production areas.
This end forming machine is a simple and versatile which permits the execution, in total safety and with excellent results, of all the pipe end-forming deformations, through a revolving tool.
Symat System is the innovative profilometer that performs automatic dimensional measures of any object in a simple, objective and fast way
CNC Cutting line SIMCUT LINE is specifically designed for each single blade cut need, and it can reach a maximum capacity up to 80mm diameter and 6mt length
SIMCUT CNC range is specifically designed for each single blade cut need, orbital or blade type, and it can reach a maximum capacity for round profiles up to 22mm diameter with coil feeding and 40mm with bar feeding.
The punching station permits to punch battery pipes and pipes in general, the punching could be easy or t-drill type.Product specifications
The punching machine is a CNC easy to equip and to programme, which permits to punch copper pipes.Product specifications
The pipe closing machine could deform the pipe ends in different shapes, depending on the utilized tool.Product specifications
SIMSTEP is an automatic charger for different geometry profiles, with batch feeding. By using the “singularization” method at different phases, it allows to avoid any chance of mistake, reducing significantly the loading time.Product specifications
The machine permits the execution, in contemporary and on more stations, of manifold brazing, etc..Product specifications
The peculiarity of this machine is that coils could be loaded piled on pallets and unrolled without additional handling.Product specifications
The blade saw unit guarantees to perform in safety the cut of copper and aluminium pipes.Product specifications
It permits to eliminate eventual profile ovalizations generated during previous end forming phases.Product specifications
Normally this station is integrated to a coil bending machine, and it permits to take the piece during the cutting phase and to deform the ends, avoiding expensive and unuseful further resumptions.Product specifications